Skip to main content

kirpa

 


An 11th month warranty inspection is a full, top-to-bottom check of your new home done near the end of your first year of ownership — before your one-year builder warranty expires.

An independent, certified inspector goes through the whole house: roof, attic, foundation, structure, plumbing, electrical, HVAC, windows, doors, and finishes. They document every defect with photos and put it in a written report. You then hand that report to your builder so they fix the problems while they’re still responsible for them.

Think of it as the final exam for your new home. You get one shot to hold the builder accountable, and this is it.

The name trips people up, so let’s be clear: it’s called the “11th month” inspection because you book it around the 10th or 11th month — not the 12th. You need the buffer. More on that below.

Tarion Warranty Home Inspections

Tairon Warrenty

People assume a brand-new home is a defect-free home. It isn’t. Not even close.

Here’s the honest reason, from someone who inspects these houses for a living: builders rush. New subdivisions go up fast, crews are stretched thin, and corners get cut. Not out of malice — just speed. And the mistakes that come from rushing don’t always show up on move-in day. They show up over the first year, once the house has been through a full cycle of Ontario winter and summer.

The ground shifts. Materials expand and contract. Caulking shrinks. Seasonal weather pushes on the building and exposes what the crew missed. That’s why month 11 is the sweet spot — the house has had time to show its flaws, but you still have warranty left to force the fix.

Miss the window, and a small documented defect becomes a large out-of-pocket repair.

The Real Ontario Timeline: How Tarion Actually Works

This is where every other article online falls apart. Most “11 month inspection” guides are written for the U.S. and just name-drop Tarion once. Here’s how it really works in Ontario.

If you bought a newly built home or condo in Ontario, your builder’s warranty is backed by the Tarion Warranty Corporation. During your first year of possession, there are three critical windows you need to know about:

    1. Pre-Delivery Inspection (PDI) — A mandatory walkthrough with your builder before you take possession. This is where you document anything damaged, missing, or incomplete on day one.

    1. 30-Day Form — Your first online window to report defects you missed at the PDI or noticed in the first month. It has to be submitted through Tarion within the first 30 days of possession.

    1. Year-End Form (the 11-month window) — Your final first-year submission window. This is where you report everything that’s emerged over the year: structural issues, drywall cracks, mechanical problems, and more — before your one-year warranty benchmark passes.

The Year-End Form is the big one, and it’s the reason the 11th month inspection exists. You want a professional inspection report in hand before you fill out that form, so your submission is complete, specific, and backed by photos instead of a vague list of things you sort of noticed.

Here’s the trap: your one-year warranty runs from your date of possession, not from when your house was finished or when you signed. Know your possession date. That’s your deadline.

What an Inspector Actually Finds in GTA New Builds

Let me get specific, because this is what separates a real inspection from a checklist someone copied off the internet. These are the defects I keep finding on new homes across Brampton and the GTA.

Bathroom exhaust fans venting into the attic

This is the one I find most. The exhaust fan is supposed to duct all that warm, moist bathroom air outside the home. On rushed builds, the duct gets left dumping straight into the attic instead.

I inspected a townhouse near Mount Pleasant where the attic was already growing mould at the 10-month mark. Every hot shower had been pumping moisture up there for months. That’s a mould remediation bill and a ventilation fix — the kind of thing that’s the builder’s problem in month 11 and your problem in month 13.

Windows that were never sealed properly

When crews rush, sealing gets sloppy. I find windows that aren’t sealed correctly all the time — gaps that let air and water sneak in. You don’t notice until you’re paying to heat air that’s leaking straight out, or until moisture starts working its way into the wall.

Missing attic insulation

It sounds impossible, but it happens: the attic insulation just doesn’t get installed, or gets installed with big gaps. On a fast-moving build, someone assumes another crew handled it, and nobody did. You feel it as cold rooms and high heating bills long before you’d ever think to climb into the attic and check.

Foundation leaks

New foundations settle, and settling plus poor grading or waterproofing equals water finding its way in. A foundation leak caught at month 11 is a warranty claim. The same leak caught at month 18 is thousands of dollars and a very stressful basement.

None of these are exotic. They’re common, they’re missable by a regular homeowner, and they’re all covered — if you document them in time.

What Happens After the Inspection

This is the whole point, and it’s simpler than people fear.

Once your inspection is done, you get a detailed report with photos of every issue found. You take that report back to your builder. Because it’s documented, specific, and inside the warranty window, the builder repairs it — while it’s still their responsibility and their cost.

Most reputable builders would rather fix a documented issue now than deal with an angry owner and a possible dispute after the warranty is gone. Your job is to make sure the issues are on paper, on time. A professional report does exactly that.

New construction is the whole reason this inspection exists — if you want to understand the full scope of what a new-build check covers, that’s the new construction inspection service to look at.

When Should You Book Your 11th Month Inspection?

Book it in your 10th or early 11th month of possession. Not month 12. Here’s why the buffer matters:

    • The inspector needs time to do a thorough job and write the report.

    • You need time to review it and submit your Tarion Year-End Form.

    • The builder needs time to actually schedule and complete repairs.

If you wait until the last two weeks, you’re gambling. Some repairs take time to arrange, and a late submission can leave you fighting a deadline you can’t win. Booking early costs you nothing and protects everything.

Pull out your possession paperwork, find your exact date, count back about six to eight weeks, and book around there.

Who Should Do the Inspection?

Not the builder. An independent, certified home inspector — someone whose only job is to represent you, not the company that built the house.

Kirpa Home Inspection Services is InterNACHI Certified and inspects new construction across Brampton and the GTA every week. We know the Tarion timeline, we know what rushed builds get wrong, and we document everything so your Year-End Form is airtight.

If your new build is in the city itself, here’s our home inspection Brampton service — and if you’re just over the border, we cover home inspection in Mississauga too.

Frequently Asked Questions

Do I really need an 11th month inspection if my house is brand new?
Yes — arguably more so. New homes are rushed, and defects like unsealed windows, missing attic insulation, and exhaust fans venting into the attic are common and easy to miss. This inspection is your last chance to make them the builder’s problem instead of yours.

Is the 11th month inspection the same as the Tarion Year-End Form?
No. The inspection is the professional evaluation that produces your evidence. The Year-End Form is the Tarion submission you file with that evidence attached. You do the inspection first, then submit the form.

When does my warranty actually expire?
Your one-year builder warranty runs one year from your date of possession — not from when the home was built or when you signed. Check your possession paperwork for the exact date.

What if the builder refuses to fix something?
That’s exactly why the documented report matters. A clear, photo-backed inspection report submitted inside your Tarion Year-End window gives you the standing to hold the builder accountable. Most fix documented issues rather than escalate.

How late can I leave it?
Don’t. Book around month 10 or 11 so there’s time for the report, your form submission, and the actual repairs before the one-year mark. Waiting until the final weeks is the single biggest mistake new owners make.


Your new home has a one-year warranty and a ticking clock. An 11th month warranty inspection is the difference between the builder paying to fix what they missed — and you paying for it a month later.

If you’re a new-build owner in Brampton or the GTA and you’re anywhere past month nine, book your new construction inspection with Kirpa before your window closes.

Close