Skip to main content

kirpa


How to Hire a Mold Remediation Company in Ontario: 9 Things to Check and 5 Red Flags

Here’s something most people don’t know until they’re already on the phone getting quotes: Ontario doesn’t license mold remediation companies.

No provincial licence. No mandatory certification. No inspector who shows up to check the work. Anyone with a van, a pressure sprayer, and a Kijiji ad can call themselves a mold remediation company tomorrow.

That’s why the three quotes you got came back at $900, $3,400, and $11,000 for what sounds like the same job. It isn’t the same job. This post is about how to tell the difference before you pay for it.

A mold remediation company worth hiring will test before and after with a third-party lab, put up real containment, remove porous materials instead of spraying them, explain exactly what caused the moisture, and give you everything in writing. The ones to walk away from quote over the phone, skip the testing, promise “guaranteed mold-free,” or tell you the whole house needs fogging.

Why Does This Matter More Than It Should?

Because a bad remediation job doesn’t look bad. It looks finished.

The wall is patched, the smell is masked, and the invoice is paid. Then six months later the musty smell is back, or a buyer’s inspector opens the wall during your sale and finds growth that was painted over. Now you’re paying twice — once for the job that didn’t work, and again for the one that does.

[CONFIRM — Balwinder] A specific case: a home where a previous “remediation” had been done and the growth was still there behind new drywall. Neighbourhood, what the homeowner had paid, what the air test read. Replace this box with the story as a normal paragraph.

So here’s the checklist. Nine things to ask for, in the order you’ll actually need them.

1. Do They Test Before They Quote?

The first question, and the one that filters out the most companies.

A real remediation quote is based on a moisture reading and an air or surface sample analyzed by a lab. That tells the contractor what species they’re dealing with, how far it’s spread, and how bad the air is. Without it, they’re guessing — and a company that guesses low to win the job will “find more” once the wall is open.

A company that quotes over the phone, or walks through with a flashlight and gives you a number on the spot, is quoting a job they haven’t measured.

Ask: “What did the lab results show, and can I have a copy?”

If you want to understand what that first visit should look like, here’s what a mold inspection consists of.

2. Will There Be a Clearance Test at the End?

This is the one that separates the professionals from the sprayers.

A clearance test is a second round of air sampling, after the work, sent to the same lab. It’s the only objective proof the job worked. Spore counts are back to normal, or they aren’t.

A company that doesn’t do a clearance test can’t fail one. That’s usually why they skip it.

Ask: “Is post-remediation testing included, and what happens if it fails?” The right answer is that they go back in at no charge.

3. Do They Find the Moisture Source — or Just the Mold?

Mold is a symptom. Moisture is the disease. A remediation company that removes the growth and leaves the cause is selling you the same job again in a year.

The quote should say what caused it: the bathroom fan venting into the attic, the grading sloping toward the foundation, the slow leak behind the tile. If the quote doesn’t mention water at all, they haven’t looked for it.

[CONFIRM — Balwinder] Does Kirpa fix causes in-house (re-venting fans, minor leaks) or refer out? Add one sentence here saying which.

Ask: “What’s causing this, and who fixes that part?”

4. What’s Their Containment Setup?

Remediation without containment is just moving spores from one room into the rest of the house.

Proper containment means plastic sheeting sealing off the work area, and negative air pressure — a machine that pulls air through a HEPA filter and out, so nothing escapes the zone. On a real job, you’ll see the poly walls and hear the machine running.

Ask: “Do you use negative air, and can I see the setup before you start?”

5. Do They Remove, or Just Spray?

Mold grows into porous materials — drywall, insulation, carpet underlay, the paper facing on batts. You can’t spray it out. Killing the surface growth and leaving the roots inside the material is why “treated” mold comes back.

Porous materials with growth in them come out, bagged. Hard surfaces — framing, concrete, studs — get HEPA-vacuumed and treated, because they can actually be cleaned.

A quote that’s all “antimicrobial treatment” and “encapsulation” with no removal line is a red flag on anything bigger than a small surface patch.

Ask: “What’s coming out, and what’s staying?”

6. What Certification Do They Actually Hold?

Since Ontario doesn’t require one, this is voluntary — which means the companies that have it went and got it on purpose.

The one to look for is IICRC (Institute of Inspection, Cleaning and Restoration Certification), specifically the AMRT — Applied Microbial Remediation Technician designation. It’s the industry standard for mold work in North America. “Certified” with no letters after it means nothing.

[CONFIRM — Balwinder] Kirpa’s remediation-side certification. Inspection side is InterNACHI — keep that separate; it’s an inspection credential, not a remediation one. Do not list AMRT unless it’s held.

Ask: “Which certification, and who holds it — the owner or the crew doing my job?”

7. Are They Insured for This Kind of Work?

General liability isn’t enough. Mold work needs pollution liability coverage, because standard contractor policies often exclude mold claims specifically. If something goes wrong — spores spread, a family member gets sick, the job damages the house — you want their insurer on the hook, not yours.

Ask: “Can I see the certificate of insurance, and does it cover mold?”

8. Is the Scope in Writing, With a Line for Each Step?

A one-line quote — “Mold remediation, basement: $3,400” — tells you nothing. A real scope lists containment, removal (with square footage), cleaning method, drying, clearance testing, and disposal, each as a line item. That’s what lets you compare three quotes that came back at wildly different numbers.

It also protects you when the wall comes off and the growth runs further than expected. A written scope means a written change order, not a surprise on the final invoice.

Ask: “Can I get this itemized?”

9. Do They Have a Real Local Track Record?

Google reviews are a start — look for specifics (“they found the leak behind the tub that two other companies missed”) rather than “great service.” Ask for a reference on a similar job. Check HomeStars and the BBB.

And look at how long they’ve been operating under that name. Restoration is an industry where a company can fold under one name and reopen under another with the same van.


The Question Everyone Asks: Should the Same Company Test and Remediate?

Fair question, and you’ll find articles online saying never.

Here’s the honest version. The concern is real: a company that profits from finding mold has an incentive to find it. That’s why some homeowners hire an independent tester first, then get remediation quotes.

Kirpa does both — inspection and remediation. Here’s how we keep that honest:

  • The lab is independent. We take the sample; a third-party lab reads it. The number is the number.
  • You get every report. Baseline and clearance, in writing. Take them to anyone you like for a second opinion.
  • We’ll tell you when you don’t need us. A surface patch on grout, a fan duct that just needs reconnecting — we say so. A job that doesn’t need doing isn’t worth our name on it.
  • Buyer inspections stay independent. If you hired us for a pre-purchase home inspection and we found mold, we don’t quote the remediation on that house. You take the report wherever you want.

[CONFIRM — Kirill] The fourth bullet reflects Option A from the plan (§0). If the policy is B or C, rewrite that bullet only.

If you’d still rather split it — test with one company, remediate with another — that’s a perfectly reasonable way to do it, and we’ll hand you a report any remediation company can quote from.

Five Red Flags That Should End the Conversation

Red flag Why it matters
A quote over the phone They haven’t measured anything.
“Guaranteed mold-free” Spores are in every house on earth. Nobody can guarantee zero; a professional guarantees normal levels, confirmed by a test.
Whole-house fogging or ozone Mold is local. Fogging a whole house is a way to charge for square footage that isn’t affected — and ozone at levels that kill mold is unsafe to breathe.
“Toxic black mold” pressure Colour tells you nothing about species. A company using scary words instead of lab results is selling fear.
No clearance test “You’ll see the difference” means you’ll see new drywall. That’s not the same thing.

Frequently Asked Questions

How much should mold remediation cost in Ontario?

It depends on square footage, what has to come out, and the cause. Anything quoted without a test is a guess — get the lab result first, then compare itemized quotes against it.

Is it worth getting a separate inspection before hiring a remediation company?

If you’re not sure who to trust, yes. It’s $450–$750, and it gives you a lab report every company has to quote against.

Can I do mold remediation myself?

Small surface patches (under about one square metre) on hard surfaces — usually yes, with the right cleaner and ventilation. Anything in a wall, in insulation, or larger than that — no. The containment is the part DIY skips, and it’s the part that matters.

How long does the job take?

One to five days on site for most residential jobs, plus lab turnaround at each end. Count the calendar, not just the crew’s hours.

Get a Quote That Starts With a Test

Every Kirpa remediation job begins with a moisture survey and a lab-analyzed air sample — because we’re not going to quote you for removing something we haven’t measured.

Serving Brampton, Mississauga, Toronto, and the surrounding GTA.

See How Our Remediation Works →

Or call (647) 474-5626